Waterproof Solution

Many applications require waterproof for the membrane switches. ElecFlex provides the following solutions
1. Frame seal gasket
A frame seal gasket without any gap will be installed at the perimeter of the circuits. That will protect the circuits and tail from humidity and considerably lengthen the life of the membrane switch which is used in the environment with high humidity.
2. Rigid PCB / flexible PCB based circuits
Replacing the regular silver paste based circuits with a rigid PCB or a flexible PCB, plus strong internal spacer, will make your membrane switch very durable in a wet environment. Typical application is outdoor use.
Overlay material:
Polyester/Polycarbonate
Oversize:
<800x400mm
Colors:
<=13
Offset printing:
Optional
Embossing:
Pillow emboss ,rim emboss or flat key
Dome:
Stainless steel, nickel plated(recommend) ,gold plated or polydome
Embedded LEDs:
Optional, single color, bi-color or tri-color
Embedded resistor:
Optional
Shielding layer:
Optional
Waterproof design:
Optional
Backlight design:
Optional
Connector:
2.54mm pitch female housing ,1mm pitch ZIF connector, or 2.54mm pitch male connector
Thickness:
>= 0.6mm

In some application, membrane switch is required to work in humid envirement, Elecflex can supply a special constructure design for it.

Overlay material: polyester(recommend) or polycarbonate

Oversize: <800x400mm

Colors: <13

Embossing: optional

Dome: metal dome or polydome

Embedded LEDs: single color, bi-color or tri-color

Embedded resistor: optional

Shieding layer: optional

Waterproof design: waterproof gasket design

Backlight design: optional

Connector: 2.54mm pitch female housing or 1mm pitch ZIF connector

Thickness: >= 0.6mm

For some application, Elecflex can use special adhesive instead of normal adhesive to enhance the waterproof capability.