Anti-UV Solution

Membrane switches used outdoor are most likely to have colors faded from sun exposure. The graphic will be yellowing and fading over time due to UV in the sunlight. To protect the graphic from fading, UV resistant material will be used as graphic overlay and it will effectively keep the graphic fresh over years. Contact us if you need an UV resistant membrane switch solution.

Overlay material:

Autotype PET F/V XE

Oversize:

<800x400mm

Colors:

<=13

Offset printing:

Available

Embossing:

Pillow emboss ,rim emboss or flat key

Dome:

Stainless steel, nickel plated(recommend) ,gold plated or polydome

Embedded LEDs:

Optional, single color, bi-color or tri-color

Embedded resistor:

Optional

Shielding layer:

Optional

Waterproof design:

Optional

Backlight design:

Optional

Connector:

2.54mm pitch female housing ,1mm pitch ZIF connector, or 2.54mm pitch male connector

Thickness:

>= 1.2mm

Overlay material: Anti-UV polyester

Oversize: <800x400mm

Colors: <13

Embossing: pillow emboss, rim emboss or without emboss

Dome: metal dome or polydome

Embedded LEDs: optional

Embedded resistor: optional

Shieding layer: optional

Waterproof design: optional

Backlight design: optional

Connector: 2.54mm pitch female housing or 1mm pitch ZIF connector

Thickness: >= 0.6mm